Vesternet logo
Vesternet logo

All articles

Vesternet Z-Wave High Load SwitchUpdated 5 months ago

The VES-ZW-HLD-016 is a Z-Wave High Load Switch and offers the following features:

  • 3-Wire (with Neutral) wiring
  • Supports Momentary or Toggle Switches
  • 16A Resistive Load (5A Capacitive / Inductive Load)
  • Power, Energy, Voltage & Current Metering
  • Small Installation Size 45.5 x 45 x 20.3 mm
  • Power Failure Load State Remembering
  • Z-Wave Plus  v2 700 Series with S2 Security

 

A manual for this device can be downloaded here.


Vesternet Z-Wave Device Drivers

These can be downloaded from here.

One file is required for this particular Device:

  • VES-ZW-HLD-016 High Load Switch Switch.groovy

 

Please report any issues with the Vesternet Z-Wave Device Drivers by submitting a technical request ticket.

This Vesternet Zigbee Device has the following features when used with our supporting Device Driver in the Hubitat Smart Home Controller (tested with Hubitat firmware version 2.2.6.139).

  • Supports On and Off Control from the Web UI.
  • Reports On and Off Events when operated from the local switch.
  • Reports Power, Energy, Current and Voltage Meters.
  • Can be used as a "Trigger" for On, Off and Meter Events in built-in Apps such as Basic Rule, Simple Automation Rules and Rule Machine.
  • Can be used as an "Action" for On and Off Control in built-in Apps such as Basic Rule, Simple Automation Rules and Rule Machine.
  • Has configuration options for Meter reporting, the default load state after power failure and for the local switch type.
Was this article helpful?
Yes
No