Vesternet Z-Wave Remote Control (12 Button) - Technical Support - HubitatUpdated 3 months ago
The VES-ZW-REM-010 is a Z-Wave Wall Remote Control and offers the following features:
- Ten buttons with simple on / off markings
- Two buttons marked S1 & S2
- Pushed, held and released events for each button
- Candy-bar shape design
- Indicator LED
- Long life CR2450 Battery
- Z-Wave Plus with S2 Security
A manual for this device can be downloaded here.
Vesternet Z-Wave Device Drivers
These can be downloaded from here.
One file is required for this particular Device:
- Vesternet VES-ZW-REM-010 4 Channel Remote Control.groovy
Please report any issues with the Vesternet Z-Wave Device Drivers by submitting a technical request ticket.
This Vesternet Device has the following features when used with our supporting Device Driver in the Hubitat Smart Home Controller (tested with Hubitat firmware version 2.2.6.139).
- Supports Pushed, Held, and Released Events for all buttons.
- Reports Battery Level Events.
- Can be used as a "Trigger" for Pushed, Held, and Released Events in built-in Apps such as Basic Rule, Simple Automation Rules and Rule Machine.