Vesternet logo
Vesternet logo

All articles

Vesternet Z-Wave SwitchUpdated 3 months ago

The VES-ZW-SWI-002 is a Z-Wave 2-Wire Capable Switch and offers the following features:

  • 2-Wire (without Neutral) or 3-Wire (with Neutral) wiring and optional Bypass for flexible installation possibilities
  • Configurable for Momentary or Toggle Switches
  • 4.8A Resistive Load (1.4A Capacitive / Inductive Load)
  • Small Installation Size 45.5 x 45 x 20.3 mm
  • Temperature Emergency Shutoff Protection
  • Power Failure Load State Remembering
  • Z-Wave Plus with S2 Security

 

A manual for this device can be downloaded here.

Vesternet Z-Wave Device Drivers


These can be downloaded from here.

One file is required for this particular Device:

  • Vesternet VES-ZW-SWI-002 2-Wire Capable Switch.groovy

 

Please report any issues with the Vesternet Z-Wave Device Drivers by submitting a technical request ticket.

This Vesternet Z-Wave Device has the following features when used with our supporting Device Driver in the Hubitat Smart Home Controller (tested with Hubitat firmware version 2.2.6.139).

  • Supports On and Off Control from the Web UI.
  • Reports On and Off Events when operated from the local switch.
  • Can be used as a "Trigger" for On and Off Events in built-in Apps such as Basic Rule, Simple Automation Rules and Rule Machine.
  • Can be used as an "Action" for On and Off Control in built-in Apps such as Basic Rule, Simple Automation Rules and Rule Machine.
  • Has configuration options for the default load state after power failure and for the local switch type.
Was this article helpful?
Yes
No