A manual for this device can be downloaded here. These can be downloaded from here. One file is required for this particular Device:. Please report any issues with the Vesternet Z-Wave Device Drivers by submitting a technical request ticket. This Ves

<h1 id="isPasted">The VES-ZW-WAL-003 is a Z-Wave Wall Controller / Remote Control and offers the following features:</h1><ul><li>Two buttons with simple on / off markings</li><li>Pushed, held and released events for each button</li><li>Standard 80mm x 80mm form factor with sticky pad or screw mounting</li><li>Indicator LED</li><li>Long life CR2450 Battery</li><li>Z-Wave Plus with S2 Security</li></ul>&#xA0;A manual for this device can be downloaded <a href="https://cdn.shopify.com/s/files/1/0066/8149/3559/files/VES-ZW-WAL-003.pdf">here</a>. <h4 id="vesternet-z-wave-device-drivers">Vesternet Z-Wave Device Drivers</h4>These can be downloaded from <a href="https://github.com/vesternet/hubitat-z-wave-device-drivers/" target="_blank">here</a>.One file is required for this particular Device:<ul><li>Vesternet VES-ZW-WAL-003 1 Zone Wall Controller.groovy</li></ul>&#xA0;Please report any issues with the Vesternet&#xA0;Z-Wave&#xA0;Device Drivers by submitting a&#xA0;<a data-mce-fragment="1" data-mce-href="https://help.vesternet.com/en-US/contact" href="https://help.vesternet.com/en-US/contact">technical request ticket</a>.This Vesternet Device has the following features when used with our supporting Device Driver in the Hubitat Smart Home Controller (tested with Hubitat firmware version 2.2.6.139).<ul><li>Supports Pushed, Held, and Released Events for both buttons.</li><li>Reports Battery Level Events.</li><li>Can be used as a &quot;Trigger&quot; for Pushed, Held, and Released Events in built-in Apps such as Basic Rule, Simple Automation Rules and Rule Machine.</li></ul>

Vesternet Z-Wave Wall Controller (2 Button)

The VES-ZW-WAL-008 is a Z-Wave Wall Controller / Remote Control and offers the following features:. A manual for this device can be downloaded here. These can be downloaded from here. One file is required for this particular Device:. Please report an

<h1 id="isPasted">Technical Support - Hubitat &#xA0; &#xA0; &#xA0; &#xA0;</h1>The VES-ZW-WAL-008 is a Z-Wave Wall Controller / Remote Control and offers the following features:<ul><li>Four buttons with simple on / off markings</li><li>Pushed, held and released events for each button</li><li>Standard 80mm x 80mm form factor with sticky pad or screw mounting</li><li>Indicator LED</li><li>Long life CR2450 Battery</li><li>Z-Wave Plus with S2 Security</li></ul>&#xA0;A manual for this device can be downloaded&#xA0;<a href="https://cdn.shopify.com/s/files/1/0066/8149/3559/files/VES-ZW-WAL-008.pdf">here</a>.<h4 id> </h4><h4 id="vesternet-z-wave-device-drivers">Vesternet Z-Wave Device Drivers</h4>These can be downloaded from&#xA0;<a href="https://github.com/vesternet/hubitat-z-wave-device-drivers/" target="_blank">here</a>.One file is required for this particular Device:<ul><li>Vesternet VES-ZW-WAL-008 2 Zone Wall Controller.groovy</li></ul>&#xA0;Please report any issues with the Vesternet&#xA0;Z-Wave Device Drivers by submitting a&#xA0;<a data-mce-fragment="1" data-mce-href="https://help.vesternet.com/en-US/contact" href="https://help.vesternet.com/en-US/contact">technical request ticket</a>.This Vesternet Device has the following features when used with our supporting Device Driver in the Hubitat Smart Home Controller (tested with Hubitat firmware version&#xA0;2.2.6.139).<ul><li>Supports&#xA0;Pushed,&#xA0;Held, and&#xA0;Released Events for all buttons.</li><li>Reports&#xA0;Battery Level Events.</li><li>Can be used as a &quot;Trigger&quot; for&#xA0;Pushed,&#xA0;Held, and&#xA0;Released Events in built-in Apps such as Basic Rule, Simple Automation Rules and Rule Machine.</li></ul>

Vesternet Z-Wave Wall Controller (4 Button)

The VES-ZW-WAL-003 is a Z-Wave Wall Controller / Remote Control and offers the following features:. A manual for this device can be downloaded here. These can be downloaded from here. One file is required for this particular Device:. Please report an

<h1 id="isPasted">Technical Support - Hubitat</h1>&#xA0; &#xA0; &#xA0; &#xA0;&#xA0;The VES-ZW-WAL-003 is a Z-Wave Wall Controller / Remote Control and offers the following features:<ul><li>Four buttons with simple on / off markings</li><li>Pushed, held and released events for each button</li><li>Standard 80mm x 80mm form factor with sticky pad or screw mounting</li><li>Indicator LED</li><li>Long life CR2450 Battery</li><li>Z-Wave Plus with S2 Security</li></ul>&#xA0;A manual for this device can be downloaded <a href="https://cdn.shopify.com/s/files/1/0066/8149/3559/files/VES-ZW-WAL-009.pdf">here</a>. <h4 id="vesternet-z-wave-device-drivers">Vesternet Z-Wave Device Drivers</h4> These can be downloaded from <a href="https://github.com/vesternet/hubitat-z-wave-device-drivers/" target="_blank">here</a>.One file is required for this particular Device:<ul><li>Vesternet VES-ZW-WAL-009 4 Zone Wall Controller.groovy</li></ul>&#xA0;Please report any issues with the Vesternet&#xA0;Z-Wave Device Drivers by submitting a&#xA0;<a data-mce-fragment="1" data-mce-href="https://help.vesternet.com/en-US/contact" href="https://help.vesternet.com/en-US/contact">technical request ticket</a>.This Vesternet Device has the following features when used with our supporting Device Driver in the Hubitat Smart Home Controller (tested with Hubitat firmware version 2.2.6.139).<ul><li>Supports Pushed, Held, and Released Events for all buttons.</li><li>Reports Battery Level Events.</li><li>Can be used as a &quot;Trigger&quot; for Pushed, Held, and Released Events in built-in Apps such as Basic Rule, Simple Automation Rules and Rule Machine.</li></ul>

Vesternet Z-Wave Wall Controller (8 Button)

The VES-ZW-REM-010 is a Z-Wave Wall Remote Control and offers the following features:. A manual for this device can be downloaded here. These can be downloaded from here. One file is required for this particular Device:. Please report any issues with

<h1 id="isPasted">Technical Support - Hubitat</h1>&#xA0; &#xA0; &#xA0; &#xA0;&#xA0;The VES-ZW-REM-010 is a Z-Wave Wall Remote Control and offers the following features:<ul><li>Ten buttons with simple on / off markings</li><li>Two buttons marked S1 &amp; S2</li><li>Pushed, held and released events for each button</li><li>Candy-bar shape design</li><li>Indicator LED</li><li>Long life CR2450 Battery</li><li>Z-Wave Plus with S2 Security</li></ul>&#xA0;A manual for this device can be downloaded <a href="https://cdn.shopify.com/s/files/1/0066/8149/3559/files/VES-ZW-REM-010.pdf">here</a>. <h4 id="vesternet-z-wave-device-drivers">Vesternet Z-Wave Device Drivers</h4> These can be downloaded from <a href="https://github.com/vesternet/hubitat-z-wave-device-drivers/" target="_blank">here</a>.One file is required for this particular Device:<ul><li>Vesternet VES-ZW-REM-010 4 Channel Remote Control.groovy</li></ul>&#xA0;Please report any issues with the Vesternet&#xA0;Z-Wave Device Drivers by submitting a&#xA0;<a data-mce-fragment="1" data-mce-href="https://help.vesternet.com/en-US/contact" href="https://help.vesternet.com/en-US/contact">technical request ticket</a>.This Vesternet Device has the following features when used with our supporting Device Driver in the Hubitat Smart Home Controller (tested with Hubitat firmware version 2.2.6.139).<ul><li>Supports Pushed, Held, and Released Events for all buttons.</li><li>Reports Battery Level Events.</li><li>Can be used as a &quot;Trigger&quot; for Pushed, Held, and Released Events in built-in Apps such as Basic Rule, Simple Automation Rules and Rule Machine.</li></ul>

Vesternet Z-Wave Remote Control (12 Button)

Vesternet

Z-Wave Controllers

Vesternet Device Support

Hubitat Drivers & Guides

Why Vesternet Hardware Devices?

Device Operation

Installing the Device Driver

Add the Device

Configure the Device

Usage in Routines, Scenarios, Automations, Scenes, Schedules & Logic

Custom Routines

Reacting to Events from a Vesternet Device

Controlling a Vesternet Device

QuickStart

Compatibility Testing

Zigbee Modules, Remotes & Sensors

Z-Wave Modules & Remotes

Vesternet Device Compatibility Testing

Vesternet Z-Wave Dimmer

Vesternet Z-Wave Switch

Vesternet Z-Wave 2 Channel

Vesternet Z-Wave High Load Switch

Vesternet Z-Wave Motor Controller

Z-Wave Modules

Vesternet Zigbee Dimmer

Vesternet Zigbee Switch

Vesternet Zigbee 2 Channel Switch

Vesternet Zigbee High Load Switch

Vesternet Zigbee Motor Controller

Zigbee Modules

Vesternet Zigbee Wall Controller (2 Button)

Vesternet Zigbee Wall Controller (4 Button)

Vesternet Zigbee Wall Controller (8 Button)

Vesternet Zigbee Remote Control (12 Button)

Zigbee Controllers

Vesternet Zigbee Door & Window Sensor

Vesternet Zigbee Motion Sensor

Vesternet Zigbee Temperature & Humidity Sensor

Zigbee Sensors

SmartThings

Vesternet Z-Wave 2 Channel Switch

Vesternet Z-Wave Remote Control (12 Button) - Technical Support - Hubitat

SmartThings Drivers & Guides

Compability Testing

TouchLink Info

Vesternet Zigbee 2 Channel Switch - Technical Support - Hubitat

Vesternet Zigbee Motor Controller - Technical Support - Hubitat

Home Assistant - Z-WaveJS Drives & Guides

Vesternet Zigbee Dimmer - Technical Support

Vesternet Zigbee Switch - Technical Support

Home Assistant Zigbee2MQTT Drivers & Guides

Become an Affiliate

Ask Product Questions

Finding Products

Contact Us

Trade discounts

Sales advice

Pre-Sales Help

Choosing LED Lights, Bulbs & Strips

Choosing Heat Controls

Choosing Lock & Access Controls

Choosing Sirens & Doorbells

7 Things you MUST decide before starting your Smart Home project

Choosing Remote Controls & Wall Controllers

Choosing Wall Switches & Dimmers

Why You Need A Smart Home Controller

Choosing Sockets

Choosing Modules

Choosing Sensors

Choosing a Controller

Wiring Diagrams

Technical Guides

Case Studies

What is Zigbee

What is Z-Wave

Glossary

Emergency

Comfort

Energy

Lighting

Security

Heating

Getting Started

Understanding Compatibility

Education

Import duty & tax

Shipping costs

Returns

VAT in prices

Where do you ship to?

Cancel or Refund your order

Payment methods

Where's my order?

Smarty Reward Points

VAT Invoice

Ordering & Delivery

Manufacturer Support

Technical Support

Technical FAQ's & Application Notes

Phone support

What does technical support cover

Product user manuals

SmartThings Edge Drivers

Mains Powered Z-Wave Sensors

Dry Contact Z-Wave Products

2-Way Lighting Guides

Physically Installing Fibaro Modules

External Rated Devices

Using Different Switches with Z-Wave modules

2 & 3 Wire Lighting Systems

2-Wire Capable Devices

Extending Z-Wave Range

700 Series Z-Wave Switching

Product FAQ's