Vesternet Zigbee Wall Controller (2 Button)Updated 5 months ago

The VES-ZB-WAL-006 is a Zigbee Wall Controller / Remote Control and offers the following features:

• Two buttons with simple on / off markings
• Pushed, held and released events for each button
• Standard 80mm x 80mm form factor with sticky pad or screw mounting
• Indicator LED
• Long life CR2450 Battery
• Zigbee 3.0 works with ZigbBee ZHA & Zigbee ZLL Hubs & Bridges

A manual for this device can be downloaded here.

Vesternet Zigbee Device Drivers

These can be downloaded from here.

One file is required for this particular Device:

• Vesternet VES-ZB-WAL-006 1 Zone Wall Controller.groovy

Please report any issues with the Vesternet Zigbee Device Drivers by submitting a technical request ticket.

This Vesternet Device has the following features when used with our supporting Device Driver in the Hubitat Smart Home Controller (tested with Hubitat firmware version 2.2.6.139).

• Supports Pushed, Held, and Released Events for both buttons.
• Reports Battery Level Events.
• Can be used as a "Trigger" for Pushed, Held, and Released Events in built-in Apps such as Basic Rule, Simple Automation Rules and Rule Machine.