The VES-ZB-WAL-006 is a Zigbee Wall Controller / Remote Control and offers the following features:. A manual for this device can be downloaded here. These can be downloaded from here. One file is required for this particular Device:. Please report an

The VES-ZB-WAL-006 is a Zigbee Wall Controller / Remote Control and offers the following features:<ul><li>Two buttons with simple on / off markings</li><li>Pushed, held and released events for each button</li><li>Standard 80mm x 80mm form factor with sticky pad or screw mounting</li><li>Indicator LED</li><li>Long life CR2450 Battery</li><li>Zigbee 3.0 works with ZigbBee ZHA &amp; Zigbee ZLL Hubs &amp; Bridges</li></ul>&#xA0;A manual for this device can be downloaded <a href="https://cdn.shopify.com/s/files/1/0066/8149/3559/files/VES-ZB-WAL-006.pdf">here</a>.<h4 id="vesternet-zigbee-device-drivers"> Vesternet Zigbee Device Drivers </h4>These can be downloaded from <a href="https://github.com/vesternet/hubitat-zigbee-device-drivers/" target="_blank">here</a>.One file is required for this particular Device:<ul><li>Vesternet VES-ZB-WAL-006 1 Zone Wall Controller.groovy</li></ul>&#xA0;Please report any issues with the Vesternet&#xA0;Zigbee Device Drivers by submitting a&#xA0;<a data-mce-fragment="1" data-mce-href="https://help.vesternet.com/en-US/contact" href="https://help.vesternet.com/en-US/contact">technical request ticket</a>.This Vesternet Device has the following features when used with our supporting Device Driver in the Hubitat Smart Home Controller (tested with Hubitat firmware version&#xA0;2.2.6.139).<ul><li>Supports&#xA0;Pushed,&#xA0;Held, and&#xA0;Released Events for both buttons.</li><li>Reports&#xA0;Battery Level Events.</li><li>Can be used as a &quot;Trigger&quot; for&#xA0;Pushed,&#xA0;Held, and&#xA0;Released Events in built-in Apps such as Basic Rule, Simple Automation Rules and Rule Machine.</li></ul>

Vesternet Zigbee Wall Controller (2 Button)

A manual for this device can be downloaded here. These can be downloaded from here. One file is required for this particular Device:. Please report any issues with the Vesternet Zigbee Device Drivers by submitting a technical request ticket. This Ves

<h1 id="isPasted">The VES-ZB-WAL-011 is a Zigbee Wall Controller / Remote Control and offers the following features:</h1><ul><li>Four buttons with simple on / off markings</li><li>Pushed, held and released events for each button</li><li>Standard 80mm x 80mm form factor with sticky pad or screw mounting</li><li>Indicator LED</li><li>Long life CR2450 Battery</li><li>Zigbee 3.0 works with ZigbBee ZHA &amp; Zigbee ZLL Hubs &amp; Bridges</li></ul>&#xA0;A manual for this device can be downloaded <a href="https://cdn.shopify.com/s/files/1/0066/8149/3559/files/VES-ZB-WAL-011.pdf">here</a>.<h4 id> </h4><h4 id="vesternet-zigbee-device-drivers">Vesternet Zigbee Device Drivers</h4>These can be downloaded from <a href="https://github.com/vesternet/hubitat-zigbee-device-drivers/" target="_blank">here</a>.One file is required for this particular Device:<ul><li>Vesternet VES-ZB-WAL-011 2 Zone Wall Controller.groovy</li></ul>&#xA0;Please report any issues with the Vesternet&#xA0;Zigbee Device Drivers by submitting a&#xA0;<a data-mce-fragment="1" data-mce-href="https://help.vesternet.com/en-US/contact" href="https://help.vesternet.com/en-US/contact">technical request ticket</a>.This Vesternet Device has the following features when used with our supporting Device Driver in the Hubitat Smart Home Controller (tested with Hubitat firmware version 2.2.6.139).<ul><li>Supports Pushed, Held, and Released Events for all buttons.</li><li>Reports Battery Level Events.</li><li>Can be used as a &quot;Trigger&quot; for Pushed, Held, and Released Events in built-in Apps such as Basic Rule, Simple Automation Rules and Rule Machine.</li></ul>

Vesternet Zigbee Wall Controller (4 Button)

A manual for this device can be downloaded here. Available here. One file is required for this particular Device:. Please report any issues with the Vesternet Zigbee Device Drivers by submitting a technical request ticket. This Vesternet Device has t

<h1 id="isPasted">The VES-ZB-WAL-012 is a Zigbee Wall Controller / Remote Control and offers the following features:</h1><ul><li>Eight buttons with simple on / off markings</li><li>Pushed, held and released events for each button</li><li>Standard 80mm x 80mm form factor with sticky pad or screw mounting</li><li>Indicator LED</li><li>Long life CR2450 Battery</li><li>Zigbee 3.0 works with ZigbBee ZHA &amp; Zigbee ZLL Hubs &amp; Bridges</li></ul>&#xA0;A manual for this device can be downloaded <a href="https://cdn.shopify.com/s/files/1/0066/8149/3559/files/VES-ZB-WAL-012.pdf">here</a>.<h4 id> </h4><h4 id="vesternet-zigbee-device-drivers">Vesternet Zigbee Device Drivers</h4>Available <a href="https://github.com/vesternet/hubitat-zigbee-device-drivers/" target="_blank">here</a>.One file is required for this particular Device:<ul><li>Vesternet VES-ZB-WAL-012 4 Zone Wall Controller.groovy</li></ul>&#xA0;Please report any issues with the Vesternet&#xA0;Zigbee Device Drivers by submitting a&#xA0;<a data-mce-fragment="1" data-mce-href="https://help.vesternet.com/en-US/contact" href="https://help.vesternet.com/en-US/contact">technical request ticket</a>.This Vesternet Device has the following features when used with our supporting Device Driver in the Hubitat Smart Home Controller (tested with Hubitat firmware version 2.2.6.139).<ul><li>Supports Pushed, Held, and Released Events for all buttons.</li><li>Reports Battery Level Events.</li><li>Can be used as a &quot;Trigger&quot; for Pushed, Held, and Released Events in built-in Apps such as Basic Rule, Simple Automation Rules and Rule Machine.</li></ul>

Vesternet Zigbee Wall Controller (8 Button)

The VES-ZB-REM-013 is a Zigbee Remote Control and offers the following features:. A manual for this device can be downloaded here. Available here. One file is required for this particular Device:. Please report any issues with the Vesternet Zigbee De

The VES-ZB-REM-013 is a Zigbee Remote Control and offers the following features:<ul><li>Four buttons labelled 1 - 4 with simple on / off markings</li><li>Two buttons labelled with S1 &amp; S2</li><li>Two buttons with simple on / off markings</li><li>Pushed, held and released events for buttons 1 - 4</li><li>Pushed events for buttons S1 &amp; S2</li><li>Main On / Off buttons sends pushed event for buttons 1 - 4 simultaneously</li><li>Candy-bar shape design</li><li>Indicator LED</li><li>Long life CR2450 Battery</li><li>Zigbee 3.0 works with ZigbBee ZHA &amp; Zigbee ZLL Hubs &amp; Bridges</li></ul>&#xA0;A manual for this device can be downloaded <a href="https://cdn.shopify.com/s/files/1/0066/8149/3559/files/VES-ZB-REM-013.pdf">here</a>. <h4 id="vesternet-zigbee-device-drivers">Vesternet Zigbee Device Drivers</h4> Available <a href="https://github.com/vesternet/hubitat-zigbee-device-drivers/" target="_blank">here</a>.One file is required for this particular Device:<ul><li>Vesternet VES-ZB-REM-013 4 Channel Remote Control.groovy</li></ul>&#xA0;Please report any issues with the Vesternet&#xA0;Zigbee Device Drivers by submitting a&#xA0;<a data-mce-fragment="1" data-mce-href="https://help.vesternet.com/en-US/contact" href="https://help.vesternet.com/en-US/contact">technical request ticket</a>.This Vesternet Device has the following features when used with our supporting Device Driver in the Hubitat Smart Home Controller (tested with Hubitat firmware version&#xA0;2.2.6.139).<ul><li>Supports&#xA0;Pushed,&#xA0;Held, and&#xA0;Released Events for each button in Groups 1 - 4.</li><li>Supports&#xA0;Pushed Events for S1 and S2 buttons.</li><li>Reports&#xA0;Battery Level Events.</li><li>Can be used as a &quot;Trigger&quot; for&#xA0;Pushed,&#xA0;Held, and&#xA0;Released Events in built-in Apps such as Basic Rule, Simple Automation Rules and Rule Machine.</li></ul><div data-mce-fragment="1"><div data-mce-fragment="1"> </div></div>

Vesternet Zigbee Remote Control (12 Button)

Vesternet

Zigbee Controllers

Vesternet Device Support

SmartThings Drivers & Guides

Why Vesternet Hardware Devices?

Device Operation

Installing the Device Driver

Add the Device

Configure the Device

Usage in Routines, Scenarios, Automations, Scenes, Schedules & Logic

Custom Routines

Reacting to Events from a Vesternet Device

Controlling a Vesternet Device

QuickStart

Compatibility Testing

Zigbee Modules, Remotes & Sensors

Z-Wave Modules & Remotes

Vesternet Device Compatibility Testing

Vesternet Z-Wave Dimmer

Vesternet Z-Wave Switch

Vesternet Z-Wave 2 Channel

Vesternet Z-Wave High Load Switch

Vesternet Z-Wave Motor Controller

Z-Wave Modules

Vesternet Zigbee Dimmer

Vesternet Zigbee Switch

Vesternet Zigbee 2 Channel Switch

Vesternet Zigbee High Load Switch

Vesternet Zigbee Motor Controller

Zigbee Modules

Vesternet Z-Wave Wall Controller (2 Button)

Vesternet Z-Wave Wall Controller (4 Button)

Vesternet Z-Wave Wall Controller (8 Button)

Vesternet Z-Wave Remote Control (12 Button)

Z-Wave Controllers

Vesternet Zigbee Door & Window Sensor

Vesternet Zigbee Motion Sensor

Vesternet Zigbee Temperature & Humidity Sensor

Zigbee Sensors

SmartThings

Vesternet Z-Wave 2 Channel Switch

Vesternet Z-Wave Remote Control (12 Button) - Technical Support - Hubitat

Compability Testing

TouchLink Info

Vesternet Zigbee 2 Channel Switch - Technical Support - Hubitat

Vesternet Zigbee Motor Controller - Technical Support - Hubitat

Hubitat Drivers & Guides

Home Assistant - Z-WaveJS Drives & Guides

Vesternet Zigbee Dimmer - Technical Support

Vesternet Zigbee Switch - Technical Support

Home Assistant Zigbee2MQTT Drivers & Guides

Ask Product Questions

Finding Products

Contact Us

Trade discounts

Sales advice

Pre-Sales Help

7 Things you MUST decide before starting your Smart Home project

Why You Need A Smart Home Controller

Choosing a Controller

Wiring Diagrams

What is Zigbee

What is Z-Wave

Glossary

Emergency

Comfort

Security

Energy

Lighting

Getting Started

Heating

Understanding Compatibility

Education

Import duty & tax

Shipping costs

Returns

VAT in prices

Where do you ship to?

Cancel or Refund your order

Payment methods

Where's my order?

Smarty Reward Points

VAT Invoice

Ordering & Delivery

Technical Support

Phone support

What does technical support cover

External Rated Devices

700 Series Z-Wave Switching

Product FAQ's

What should I do if my order only partially arrived?

How to handle a device return for troubleshooting?